Depolab Indonesia

Hover to Zoom

Last Updated
26 Oct 2020
Country Origin
United States
Minimum Order
1 unit

Specification of LXV322 TSS TURBIDITY

Three measurements in 1 Instrument LXV 322.99.00002

The Handheld Portable Hach TSS turbidity, Suspended Solids, and the method of Sludge Blanket Level Instrument unique multi-beam light alternating with infrared diode system provide a broad measurement range for both turbidity and suspended solids in one handheld portable instrument.
Several Calibration Curves for convenience

This saves up to four different calibration curve for suspended solidsand one for turbidity. No need to re-calibration constant for different locations or types of mud.
Easy Level Of Sludge Blanket

A blanket of mud level can be measured by setting the units of mg/L, g/L or percent. The calibration of the instrument and then slowly lower the sensor into the clarifier. The concentration of suspended solids will increase significantly due to reach the level of a blanket of mud. After the level has been reached, check cable blanket censorship that markedeach meter to determine the depth of the sludge blanket level from the surface of the water.
Air Bubble Compensated for accuracy

Software instruments automatically compensate for air bubbles to prevent its influence on the measurements. Pre-calibrated with turbidity calibration curve stored in the instrument. For suspended solids, each calibration curve can be adjusted to the results of the calibration curve for each laboratory may use up to three pointsper curve plus the value zero.
The material is durable for Long Life

The probe is made of polished stainless steel with scratch-resistant Sapphire window to withstand harsh environments. Polished stainless steel helps keep particles stick to the surface of the probe. Internal memory stores up to 290 value measurements, including measurements, date, time, location, and its homogeneity. Three operating modes are available: single, continuous, or hose.
What's in the box?

Turbidity, Suspended Solids and Sludge Level meter, probe, rechargeable battery, charger, manual, bag
Cable length: 10 m cable with marks for distance
Input current: approx. 60 mA
Dimensions (D x L): 11.42 x 1.57 in (40 mm x 290 mm)
Metric dimensions (H x WXD): (4.3 x 9,1 x 1.6 in) 110 mm x 230 mm x 40 mm
Display: 4-line alphanumeric display 16 characters
Length: 11.4 in (290 mm)
Ingredients: Censorship body: stainless steel
Metering mode: continuous measurement, the integration time setting from 0 to 1000 seconds
Measuring principle: several methods of Combined alternating rays with rays and infrared diode system focused.;
Turbidity: 2-channel, 90 ° scattered light measurement in accordance with DIN/EN/ISO 7027 27027;
The value of the additional verification measurements through the measurement of multiple-angle six channel;
Solids: measurement of the absorption of the modification; measurement of multiple-angle six channel;
Mengmeasurement range of TSS-content:,001-400 g/L range depending on the characteristics of the sample
Measure the Turbidity Range:,001-9.999 FNU
Memory: up to 290 measurement point
Operating pressure: 0-10 bar (0 to 145 psi)
Operating temperature range: 0 to 60 ° C
Power: automatic closing after 4 minutes (if no buttons have been pressed and no fixed measurements enabled)
Suspended Solids precision: less than 4% or ± 0.001 g/L, whichever is greater
PrecisionTurbidity: less than 3% or ± 0.02 NTU where bigger
Pressure ranges: Max. 10 bar
Protection Class: IP68 Probe; IP control unit 55
Relative humidity: 0 to 95%
Resolution: Suspended Solids: 0.001 at 0-,999 g/L
Suspended Solids: 1-9,999 0.01 g/L
Suspended Solids: 0.1 on 10-99.9 g/L
Suspended Solids: 1 in more than 100 g/L
Wave length: 860 nm
Weight 2: Probe:
Moistened materials: Probe: stainless stee

Untuk keterangan lebih lanjut, silahkan download PDF ini :



Foto dari Pembeli

Ulasan dari Pembeli

Dengan Foto
Request a Quote
Produk Siap di Pesan
Rp 0
Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT